PV1 User Manual
Load, close and pull. The Eyce PV1 is a durable, portable dry herb vaporizer with a glass-lined ceramic oven, a stainless-steel airflow path, a rotating mouthpiece and AutoFlow™ temperature sessions. Here is everything you need to get started.
What's Included
- 1x PV1 Vaporizer
- 1x 3-ft USB Type-C charging cable
- 1x User manual
Adding Material
- Open the silicone bottom lid to reveal the glass-lined ceramic oven.
- Grind your herb and pack it densely for better heat transfer.
- Close the bottom lid. The built-in silicone compactor packs the herb firmly.
Power and Temperature
Click the button 5 times quickly to turn the PV1 on or off. Click 3 times quickly to change the AutoFlow™ session temperature. Each session gradually raises the temperature over 5 minutes.
| Light | Start temp | End temp |
|---|---|---|
| Blue (low) | 350°F / 176°C | 370°F / 188°C |
| Green | 370°F / 188°C | 390°F / 199°C |
| Yellow | 390°F / 199°C | 410°F / 210°C |
| Red (high) | 410°F / 210°C | 430°F / 221°C |
Using the PV1
- The PV1 starts heating as soon as it powers on. The light around the button shows your AutoFlow™ temperature.
- Rotate the mouthpiece to whatever angle feels best.
- The PV1 vibrates when it reaches temperature. The number of vibrations matches the setting (for example, 2 vibrations for green).
- The PV1 turns off automatically after a 5-minute session.
Light Brightness
Press and hold the button to cycle the LED brightness. Release at the level you want.
Battery and Charging
Charge with the included USB Type-C cable. You can use the PV1 while it charges, but a full charge will take longer. While charging, the light flashes in the color of the current charge level and turns steady white when full.
Click the button once to check battery level: red is 25%, blue is 50%, green is 75% and white is 100%. The PV1 vibrates when 10% battery remains.
Cleaning the PV1
Clean any part that touches vapor regularly to keep the PV1 performing at its best. Soak the mouthpiece in 70%+ isopropyl alcohol as needed, then rinse with water. For non-removable parts, use a cotton swab dipped in 70%+ isopropyl alcohol.
Never submerge the device in liquid, and never use abrasive materials on the device, oven or vapor path. Let every part dry completely before use.
Factory Reset
With the PV1 turned off, press and hold the button for 10 seconds.
Warranty and Safety
The PV1 is covered by a 1-Year Limited Warranty. See the manufacturer's warranty for full details.
Internal components get hot. Do not open or touch internal parts while the PV1 is on, hot or in use, and let it cool before cleaning, stirring or opening the oven. Misuse can damage the battery or create a fire hazard.
Download the PV1 user manual (PDF), which includes a QR code for the manual in multiple languages.